CNC Calculator

Tolerances

ISO fits, general tolerances, surface finish, and tolerance stacks.

All tools

In short: Tolerances

The tolerance calculators determine limits and fits according to ISO 286, general tolerances according to ISO 2768-1, tolerance stacks and roughness values as well as statistical figures such as process capability, measurement uncertainty and sampling plans. They do not replace inspection planning, but quickly show whether a requirement can be manufactured and inspected with the intended process.

Frequently asked questions about Tolerances

What does a fit such as H7/g6 mean?

Capital letters denote the tolerance class of the hole, lowercase letters that of the shaft, and the number the IT grade according to ISO 286. H7/g6 is a clearance fit: the hole starts at the nominal size and the shaft lies just below it. At 20 mm nominal size the clearance is 7 to 41 µm.

When do general tolerances according to ISO 2768 apply?

They apply to dimensions without an individual tolerance when the drawing refers to the standard, for example with ISO 2768-m. Part 1 defines permissible deviations for linear and angular dimensions in the classes f, m, c and v. For a 50 mm linear dimension, class m allows ±0.3 mm.

How do you calculate a tolerance stack?

Arithmetically (worst case), all individual tolerances are added; the result is safe but often unnecessarily tight. Statistically, the root of the sum of squares is used and a small probability of exceeding the limit is accepted. Four tolerances of ±0.1 mm give ±0.4 mm arithmetically and ±0.2 mm statistically.

What do Cp and Cpk tell you?

Cp compares the tolerance width with the process spread of six standard deviations; Cpk also considers how far the mean is from the nearest limit. Cpk ≥ 1.33 is a common requirement; at Cpk = 1.0 the spread just reaches the nearest limit.

All features Free quotation assistant AI quote MCP Legal notice Privacy L&I IT-solutions GmbH & Co. KG in cooperation with D'Este Solutions and Bley IT

Carlo D'Este, D'Este Solutions

Help and contact

We are happy to answer your questions about the CNC Kalkulator in person.

Carlo D'Este, D'Este Solutions

Welcome to the CNC Kalkulator

Do you have questions about costing or getting started? Every question is welcome.

Questions? Give us a call!