Wire EDM time
Free wire EDM time calculator
Estimates main and trim cuts, threading, alignment and setup in wire EDM from contour length and height.
How to use the result
The cutting rates are cautious start values for brass wire on common machines; your own machine tables take priority.
A closed contour needs a start hole. Plan it as a drilled hole in the soft state before hardening, otherwise it stays open.
Wire and filters cause running costs; they are part of the machine hourly rate and not shown separately here.
Formulas
t_main = contour length · height / cutting rate(material, height band) [mm²/min]t_trim = t_main · Σ trim shares (0.35; 0.20; 0.15)t_piece = t_main + t_trim + starts · 0.7 min + handling + 3 min alignmentProgramming = 15 min + 5 min per contour type Sources: Cutting rates and trim-cut shares in wire EDM from general textbooks on electrical discharge machining; set cautiously as an assumption (start value).; Shared time-model data time-model-data-v1 of both applications (start values with source and assumption flag).