Sinker EDM time
Free sinker EDM time and electrode calculator
Estimates roughing and finishing time, electrode changes and electrode demand when sinker eroding one cavity.
How to use the result
Roughing and finishing rates are cautious start values for graphite and copper electrodes; the tables of your generator take priority.
The electrodes are one-time tooling costs of the order and do not belong in the piece time. Cost their milling time at the rate of your milling machine.
From Ra 0.4 µm polishing is needed afterwards. That time depends on area and edges and must be entered by the shop.
Formulas
Q_rough = min(max(0.1 · A_proj, 10), Q_max(material)) [mm³/min]; t_rough = 0.9 · V / Q_roughA_surface = A_proj + perimeter · depth; t_finish = A_surface / A′_finish(Ra)t_cavity = t_rough + t_finish + 3 min orbiting + electrodes · 2 min changeElectrodes per cavity = 2 · round up(batch quantity / 20) Sources: Removal rates in sinker EDM from general textbooks on electrical discharge machining; set cautiously as an assumption (start value).; Shared time-model data time-model-data-v1 of both applications (start values with source and assumption flag).