Incoming inspection of supplied parts
Free incoming inspection time calculator
Estimates the inspection time per batch for supplied blanks or parts from first-article check, containers and sample.
How to use the result
The sample table is a start value based on a reduced special inspection level of ISO 2859-1 and no statement of conformity.
Inspecting every part is needed only on explicit request, for example an agreed 100 % sorting inspection.
Enter your shop’s inspection strategy as soon as you have your own times; the start values are assumptions.
Formulas
t_batch = 10 min first-article check and papers + containers · 2 min + n(batch) · check minutes per sampled partContainers = round up(batch quantity · mass per part / 25 kg)Check minutes = 0.5 (dimensions, allowance) + 0.5 (hardness, if applicable) + 0.2 (centre holes, if applicable) Sources: ISO 2859-1: Sampling procedures for inspection by attributes (orientation for the sample size, reduced start values).; Shared inspection strategy inspection-strategy-v1 of both applications (start values with source and assumption flag).